Stephanie I. Williams

1775 Outpost Drive

Corona, CA 92882

Email addresses –MsTeck@hotmail.com 714-329-5575 cell

Objective:

Position in engineering management, employee health and safety (EHS), R & D Electronics Engineering or Senior Engineering Technician positions that will build upon my +33 years of experience working in safety (EHS), engineering and electronics engineering companies and my specialized training. Open to first shift, 9-80, full time, part time and contract in Orange County, western Riverside and San Bernardino Counties. References are available upon request.

 

After an early retirement with Boeing I have held the part time contract position of:

Senior Electro-Optical Engineering Technician with Vectronics in Irvine contracted through On Line Technical Services 9/2014 to present. There I have tested, troubleshot and calibration of Thermal Imaging Cameras with LabVIEW software, programed the cameras, inspected, verified, inventory, maintain lab, interfaced between management, quality, engineering and consulting on matters of safety.

 

While working for Rockwell International/Boeing B.N.A/Boeing Anaheim, Rocketdyne, El Segundo Divisions. 10/1983 to 8/2014- I held these positions: Electronic Equipment Checkout Mechanic 6 mos., then promoted to Senior Infrared Engineering Technician Lead 12 years, Senior Engineering Technician R & D 12 years, First Line Floor Leader Supervisor Engineering Services Technical Specialist III 7 years, Retired Early, to pursue positions that would be much closer to my home.

 

Supervise 22+ technicians including 2 tech leads. Electronic Equip. Check Out Mechanic-Electro Optical Center Anaheim, Electronic Development Tech-Electro Optical Center Anaheim , Infrared Sensor Tech-Electro Optical Center Anaheim , Electronic Development Tech Marine Systems Anaheim Div,  Electronic Development Tech-Rocketdyne Div, Electronic Development Tech Rocketdyne Div., Engineering Tech Research and Development Anaheim Div. Representative for multiple Joint Hourly/Boeing Heath and Safety Sub-Committees, Co Team Leader (EHS) SHEA BEST TEAM, Hourly Alt. Health and Safety Rep. Anaheim Div.,  Test & Evaluation Technical Services Specialist 3 Integration Lead, Space Simulation Laboratory El Segundo.

 

Boeing is an ISO 9001, Sigma 6, Lean, 5S environment. I have Extensive experience with analog and digital oscilloscopes & meters, LCR meters, microscopes, micro probes, curve-trace, temperature controllers, logic analyzers, current amplifiers, differential measurements, large and small current power supplies, spectrum analyzers, micro & milli ohm meters, vacuum, pumps, pneumatics, IV plotters, connecting PC test hookups, printers, usage of PC’s, windows 3.1, 3.11, 95, NT, 2000, XP, 7, word , excel, access, power point,  LabVIEW, programs.

 

I Inspected, verified that electronic devices complied with Company & customer requirements. Made and maintained schedules, maintained records, generated presentations, directed manpower, training, supervised employees, lead safety team, lead manpower, overtime records, implement training, mentor/coach technicians, interview perspective employees within SSL, Perform risk assessment before and during every task to verify task is safe for personnel and hardware. Verify that we are following the pre-task & post-task review checklist. Verify TECH logs are used and correctly filled out and closed out. Verify planning, parts, GSE are correct for task. Verify personnel are properly trained or certified for the work being done. FOD control. ESD control. Personnel and hardware safety OSHA Certificate, OSHA investigations, Communication, Pre-task & Post-task reviews, Flawless execution, Direction, Program Security requirements, Paperwork, Non-Flight Log, Tool Box, including tool control, Keeping everyone informed, Support group readiness to work and coordination of spacecraft access, Handle Emergency situations. Conduct white board meetings, staff meetings and training.

 

I Set up, preformed functional tests in The Electro-Optical Center/Science Center. Worked in The Electro-Optical/Science Center/Marine Systems in the capacity of both Electronic Development Technician and Laboratory Technician Infrared Sensor Technician. Fabricated, assembled and tested developmental-experimental-Prototype Electro-optical infrared sensor devices and instruments. Continuity tests, wrote test procedures, redline procedures & schematics, prepared sketches of breadboard, UUT & test equipment. I aided in the design of power supplies, power conditioners, power converters, relay controllers, fabricated, assembled breadboard circuits and systems, test equipment & prototype units, test, assist engineers in the test of boards & systems, designed test sites, consoles & related equipment. Ran Qual, ATP. EMI Test,

 

Safety Health and Environmental Affairs/Boeing Employees Safety Team Co-Team Leader, Representative for multiple Joint Hourly Employee/Boeing Heath and Safety Sub-Committees, Employee Health and Alt-Safety Rep., Hourly Employee Recording Secretary, EI Health and Safety Chair, EI Recording Secretary. EI Alternate Team Leader.

 

While on various manpower cutback layoffs from Rockwell/Boeing I worked temporary assignments with:

 

PDS Contractor/Consultant Tech for Matustuta Avionics Div. Irvine, CA 9/1991- 3/1992

Engineering Test, fabrication, breadboarding, assist in training lab manager on how to organize lab, order parts, retain & use lab solvents, troubleshoot pwb’s, breadboards, fabricate mock up display’s for shows. Use oscilloscopes, mulitmeters, logic analyzers as well as various hand and power tools. Redlined drawings. Train employees in solder, crimping, wire-wrapping, harnessing, and layout. Test and troubleshoot system to component level, analog and digital.

On-Line Power-4/1992-5/1993 Test Supervisor

Generate drawings of all existing test equipment by ohming out and hand drawing schematics. Design new test equipment for power supplies. Write test procedures for existing test equipment and new test equipment. Generate complete schematic and mechanical drawings for all new test equipment. Train assemblers for crimping, harnessing, soldering. Instruct Technicians on Troubleshooting. Troubleshoot all Dog and Multi-problem boards and systems to component level. Systems were UPS, Single phase power supplies and 3 phase power supplies. Keep track of all test inventory records and supervise test technician, interface with Engineering when manufacturing parts cause functional problems with performance and corrected and resolved performance problems. Dealt directly with outside vendors in the field to resolve issues with outside manufacturing errors of products. Maintained all logs and records regarding Test Department. Test and troubleshoot various power systems analog and digital systems. Aided in development of advanced products by consulting, fabricating, breadboarding, testing, troubleshooting, red lining drawings, etc.

DRS 10/2001-2/2002 Lab Tech Infrared Sensors

Inspected, verified, performed functional test, ATP of  Mux, Hybrid, Wafers assemblies by mounting in high vacuum cryogenic enclosures transferring cryogen’s (liquid helium and nitrogen) and nitrogen, helium Argon gasses, conducting computer and manual testing, assembling, repair, maintenance, upgrading test apparatus, fixtures, repairing and building probe plates, circuits, evaluating tests, calibration, devised fixtures, mechanisms, test equipment to meet required performance. Planed, laid out, assembled developmental, experimental-prototype electronic equipment, continuity tests, etc.

 

Earlier Work Experience:

 

MSI Data Corp 9/1981-10/1983 Senior Electronic Technician Class 4- In-house and field Service repairs, bench test, troubleshoot multiple systems to component level, wrote test procedures, trained other employees, program EPROM’s, troubleshot & repair modems, memory, CPU, printers, A to D converters, controllers, scanners, tape drives, interfaces, equipment calibration, fax systems to component level, analog and digital.

 

Pertec Computer Corporation 1/80-9/1981 Electronics Technician

Troubleshoot PCB’s Analog & Digital using automated Fault Finder, Bench Testing/Troubleshooting & System Test/Troubleshooting system to component

 

Safeway Stores Warehouse 7/78-12/80 Order Selector

Fill warehouse orders from stores. Used motorized pallet jack, lowboy and forklift. Inventory, loaded truck trailers.

 

Acro-Spec Grinding Company 6/75-3/78 Lead Machinist

Set up machines, train employees, deliveries, take orders, direct, assign work load, make mechanical drawings, shipping & receiving, payroll., operate centerless grinders, thread rolling machined, de-burring, work with customers to resolve problems, use micrometers, calipers, depth gauges, scales, thread gauges, go-no go gauges, read blueprints.

 

 

Education:

1/80  Practical Schools Anaheim California Certificate of Electronics Engineering Technology 4.0 GPA

5/82 South Coast College Costa Mesa CA Major Electronics Design Technology 3.5 GPA

1976 Anaheim Adult Education Anaheim CA Study Course Business

2003 Lab View UCI

1983 to Present Rockwell and Boeing Training and Certifications

2005 ETA Fiber Optics Certified FOI Light Brigade

2006 Fork Lift Operator License Johnson Lift/Hyster 6000lb Counter Balance

2007 University of Phoenix Business Management/Supply Chain Management

 

Specialized Training

Rockwell International/Boeing B.N.A. Anaheim , Canoga Park, El Segundo CA-  ETA Fiber Optics Certification, Soldering, Wire Wrapping, Bonding, Filleting, I.D. Marking and Circuit Cut Cert., Crimp-Wiring & Connector Assay Certification, Torquing And Staking Cert, MIL- STD-2000A Solder Cert, J-STD Solder Certification, Automatics Solder Cert., ESD, Hazardous Materials, Lead Handling, Compressed Gas & Cryogenics Cert., Propane Dispensing Certification, Ordinance Handling Certification,  Theodolite, Introductory Radiation & Radiation Protection, Fork Lift Certified,  Inplant Mobile Equipment Cert., MS Word, Excel, Power Point, Access, Windows NT-2000-XP, Employee Involvement, Team Leader Certified,  Employee Involvement, , Malcolm Baldrige Writer's Workshop Overview, Air Quality Mgmt. Program; Solvent Use Logs, HAZMat Waste & communication, Overhead Cost Management Training, VSP Orientation Training, TQM Management Seminars, Export Control, Safety & Environmental Awareness, CPR & Heimlich, Environmental Protection Agency rule 608 Seminar/Ex, , Employee Safety Representative Certified. OSHA Certificate Health and Safety, UAW/Boeing Health and Safety Representative Training, Accident Investigation Safety Observer and WAF Training, Ergonomics factory, non-office and office. Leading within the Law, Person in Charge Certified.

 

Security Clearance

Current held – DOD Secret, COMSEC, SSBI previously held- DOD Classified & DOD Secret Silver Condor Wing,

Secret Clearance active since 1984, COMSEC 2006, SSBI 2011, US Citizen.

 

Citizenship & Awards

APCM I Certificate of Recognition 1985

APCM II Certificate of Recognition 1990

DDCU Space Station Power Special Achievement Award 1993

DDCU/RPCM Space Station Power Special Achievement Award 1994

GRP MGS Certificate of Achievement Special Performance 1998

S.H.E.A. Appreciation Award 2001

E.I. Recognition Award 2002

Certificate of Recognition Award for contributions to E.I. Business Case “10 to 4” Team 2002

Achievement Award for contributions to Eng. Tech Support Teams’ “Tools-R-Us” Business Case 2003

Global Achievement Award Boeing Employee S.H.E.A. Team/ (B.E.S.T.) 2006

Appreciation Award Exceptional Performance for support & dedication to the S.H.E.A/ B.E.S.T 2006

Achievement Award Exceptional Performance to Fall Classic/Business Cases for Process Improvement 2006

Appreciation Award Safety Award 2006

Achievement Award WGS & GPS programs achieving year end goals 2008

Achievement Award Outstanding effort in preparation and installation of Protostar Instrumentation 2008

Achievement Award Outstanding efforts by Protostar II Dynamics Vibration/Acoustic exhibiting tremendous dedication to complete testing with great personal sacrifice of personal time to meet schedule 2008

Achievement Award for effort in supporting SCTV of GPS IIF 2009

Accomplishment Award special recognition of outstanding execution of the MSV F2 for Environmental testing to enable cost reduction goals 2010

Achievement Award dedication and experience of WGS F4 SCTV build and de-build were performed safely while there was urgency to meet schedule and executed the plan flawlessly 2011

Achievement Award participating in Employee Safety Team (Team Leader) and for contributions to the sites safety performance 2012

Achievement Award in appreciation of my leadership and team work to prevent schedule erosion of 3 spacecraft tests which are currently in progress in the Space Simulation Laboratory 2012

Boeing Affinity Diversity BEGALS 1997-2014, participated in Boeing Diversity representation for community information, outreach and education.

Boeing El Segundo Diversity Representative for Governor’s Women’s Conference 2008-2014.